Absolute Carnage Comic Cover

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Red Transmission Distance: 6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Pure Yellow Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Black until layer #20 at 1.68mm
Red until layer #29 at 2.4mm
Orange until layer #30 at 2.48mm
Pure Yellow until layer #34 at 2.8mm
White for the rest.

havent printed but this is my next HueForge comic Cover
 

Once Black is finished i will swap it for white in the AMS and make the last layers in the gcode “black” to avoid any issues while printing. if any of you try it before i get to printing it please let me know how it goes. have a good weekend.