Mexican Train Game complete with Box, 91 dominos Station and domino Stands

If you like the game, this is complete, everything you need is here including a nice storage box, 91 Domino's, station and domino stand…all fits in box….    SCORE SHEET INCLUDED

Printing is long, on a Bambu printer all piece take a total of about 18hrs.

on a standard printer like a Enders etc will take 65-70hrs

the domino's are printed in PLA, the rest I did in ABS.

setting for all .04 nozzle, standard 0.20 with 25% fill

The Domino's are in 6 sets, i print 2 set (part 1 and 2) at once on the P1P printer with AMS for 2 colors, SHUT OFF PRIME TOWER under OTHERS, on a X1 you will need to prints them 1 set a time or shut off the flow calibration to have the space needed

all other parts i print in ABS on the X1 Carbon, always do a calibration before printing the box or cover they need to be perfect so the cover snaps on and stays on..i do the cover in 2 tone as well, if you want the logo to stand out print cover main color in slicer layer 5 and 6 change to secondary color for logo, then layer 7 change back to primary color…once again SHUT OFF PRIME TOWER under OTHERS. 

all can be printed in PLA, i choose to use ABS for 2 main reasons, it prints larger parts faster and ABS is better for weather outside and more heat resistant in the sun.

TIP… Cover and Box should be Printed on the same printer, the tolerance are so tight just being off 0.10 will cause cover to be loose or to tight…THERE IS A SAMPLE DOMINO 12/12 TO TEST PRINT SO YOU CAN PRINT 1, ALSO USE THE TEST FILE TO SET COLORS IT WILL SLICE FASTER.

Total Time on a Bambu is 18hrs and a roll of Filament total..

 I LOOK FORWARD TO YOUR COMMENTS TO IMPROVE WHAT IS ALREADY GREAT

ENJOY

ALL FILES ARE BASIC STL FILES SO YOU CAN USE 0.20/50% OR WHAT YOU PREFER