Hueforge Placard

Designed for the Typography contest, this placard was made to advertise the versatility of HueForge, the Filament Painting program.  Simply slice in your preferred slicer, add the color/filament changes, and enjoy your own signs.  Works with both Multi-Material and Single-Nozzle extruder setups.

To Print:

Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyTerra Muted Purple Transmission Distance: 0.3
PLA PolyTerra Sapphire Blue Transmission Distance: 0.3
PLA PolyLite Yellow Transmission Distance: 11
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Cream Transmission Distance: 2
PLA PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #10 at 0.52mm
Muted Purple until layer #20 at 0.92mm
Sapphire Blue until layer #29 at 1.28mm
Yellow until layer #36 at 1.56mm
Red until layer #50 at 2.12mm
Cream until layer #60 at 2.52mm
White for the rest.
 

Get your own copy of HueForge here: https://shop.thehueforge.com/