Large Tiles lamp

My idea was to print a large lamp. Larger than my 3d printer was capable.

So i made this  one you can print in parts.

You need to print 30 tiles. I used 15 tiles A and 15 tiles B. But you can use only one type.

You can play with colors as you want.

Also you will need  60 separators. Print one and check fit. Scale as necessary.

I used a  bit of superglue on each.

The lamp holder is design with this in mind: https://sinolec.co.uk/en/ceramic-lamp-holders/239-ceramic-e27-lamp-holder-k327a02.html

Feel free to adapt.

For the bottom glass i used the plastic glass from an old tv. I cut it  with a Dremel

Diameter of glass is 54cm.  But before cut, please print all parts and mesure actual size.

Hope its useful.