Hormann Remote Control Protective Sleeve/Cover Back Spacer (HSE4BS, HSE2-868-BS)

A spacer that goes between this loop and the body of the remote. It is to be used with Hormann HSE protective case by Jakub Kalfař or HORMANN Coque pour télécommande by nico206.

Glue it to the loop so it's easier to assemble.

I uploaded a STEP file so you can change the dimensions. This makes my centered.

Print Settings

Material: PLA
Layer height: 0.2 mm 
Perimeters: 3
Infill: 15%
Supports: no

Other replacement parts

If you broke yours like I did, here is a list of replacement parts I found and made to repair mine.

• Hormann HSE4BS replacement cover with a hole by Hologos
• Hormann HSE4BS remote control buttons by Hologos
• Hormann Remote Control Protective Sleeve/Cover Loop (HSE4BS, HSE2-868-BS) by Hologos
• Hormann Remote Control Protective Sleeve/Cover Back Spacer (HSE4BS, HSE2-868-BS) by Hologos
• Hormann Remote Control Protective Sleeve/Cover Front Cap (HSE4BS, HSE2-868-BS) by Hologos
• Hormann HSE protective case by Jakub Kalfař