LED mount for MK4
A LED mount that gives room for the extruder also in top position. You can attach the LEDs of choice using a cable tie.
23
44
1
752
updated February 20, 2024
Description
PDFI wanted to attach a LED strip to my MK4. This model is mounded at the outer ends of the frame to make sure it doesn't obstruct the extruder. The mount is “snap on” from two sides, no screws required.
Printed on MK4 using Prusament PLA Jet Black, 0.4 Nozzle, 0.2 Layerhight, Organic support. Prints in around 6 hours, total weight below 60g
Tags
Model origin
The author marked this model as their own original creation.
