Ender Pro Raspberry Pi Touchscreen Mounts for Smart Pi Touch 2 Case

It's an odd-use case and probably won't get much love, but I had the screen lying around unused. These two brackets allow you to attach the Smart Pi Touch 2 screen case (with Raspberry Pi and fan on the back). It'll allow for some angle adjustment while clearing the bed. Ensure that you modify the Y-axis screws to be face down as pictured if necessary. You'll also need some feet with approximately 56 mm of height. The feet picture are here: https://www.printables.com/model/311256-ender-3-pro-isolation-feet-for-racquetball-56mm-di.

You'll also need one 3mm x 8mm long bolt and two 3mm x 16mm long bolts and 3x t-slot nuts. The bolts from the case kit are used to attach the brackets to the screen.  Nuts press fit into hex indentations.

This will work with the Ender 3 Pro but not the Ender 3 since it has a smaller Y-axis extrusion. It should work if your printer uses 4040 extrusions that are spaced apart:  33mm vertically from top face to top face and 145mm in the X-direction from left face to left face.

Printing the right bracket requires a bit of support and the left bracket is a bit worse. I've included an orientation that worked on the left bracket, I love those organic supports!