Lord of the rings - Triptych style (Filament Painting)

multi-Colour HueForge model. Lord of the rings - Triptych style filament painting made using Sunlu and Esun PLA+ colours.

Print at 0.08mm layer heights, 0.16mm first layer.  100% infill (Rectilinear)

LOR - The Green Tree

Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Esun PLA+ Pine Green Transmission Distance: 2.5
PLA Sunlu PLA+ Grass Green Transmission Distance: 2.5
PLA Sunlu PLA Green Transmission Distance: 10
PLA Sunlu PLA+ White Transmission Distance: 7

Swap Instructions:
Black until layer #5 at 0.48mm
Pine Green until layer #6 at 0.56mm
Grass Green until layer #8 at 0.72mm
Green until layer #9 at 0.8mm
White for the rest.
 

LOR - The Blue Tower

Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Esun PLA+ Dark Blue Transmission Distance: 2.5
PLA Sunlu PLA+ Blue Transmission Distance: 3.5
PLA Esun PLA+ Space Blue Transmission Distance: 3
PLA Sunlu PLA+ White Transmission Distance: 7

Swap Instructions:
Black until layer #5 at 0.48mm
Dark Blue until layer #7 at 0.64mm
Blue until layer #9 at 0.8mm
Space Blue until layer #12 at 1.04mm
White for the rest.

LOR - The Red Volcano

Filaments Used:
PLA Sunlu PLA+ Black Transmission Distance: 0.6
PLA Esun PLA+ Fire Engine Red Transmission Distance: 5
PLA Esun PLA+ Magenta Transmission Distance: 6
PLA Sunlu PLA+ Skin Transmission Distance: 7
PLA Sunlu PLA+ White Transmission Distance: 7

Swap Instructions:
Black until layer #5 at 0.48mm
Fire Engine Red until layer #6 at 0.56mm
Magenta until layer #7 at 0.64mm
Skin until layer #8 at 0.72mm
White for the rest.

This is a filament blending model, avoid special filaments and stick with the plain ones for the best results.  SUNLU filaments tend to be more transmissive and are a good choice.

Use the exact numbers in your slicer to match up properly.