Snackbox Micro case

This case is made for Snackbox Micro. A leverless controller made by Junkfoodarcades.

To assemble it you need:

- 8 M3 heatset inserts that are not longer than 5mm in length
- 8 M3 screws

Changelog:

• 08.08.2023:
  • Added a STL for the top 7 knubs
• 07.08.2023: 
  • Added a shadowline to the model
  • Decreased the knub hole diameter

Update 30/04/2024:

Added a second case with a second thumb button that uses magnets for closure rather than heat inserts. 

• You'll need to hand wire the extra button as the image shows.
• For assembly you'll need 16 6mm(diameter) x 3mm(thickness) magnets