Skadis Light Switch Plate

I wanted a place to dump my pocket stuff but I still wanted it to be organized. I've been doing a lot of skadis accessory printing so I figured I can add that functionality to what I wanted just in case what I carried with me changed.

I don't have the traditional light switch with the toggle arm so I couldn't measure that to make it but if someone wants it, just measure it and I can edit it super easy. Only issue is that because the only thing holding it are the 2 screws from the original plate, the opposite side isn't adhered in place but I just used double sided tape and carefully pull things out. 

The holes are dimensioned to be the same as a skadis board put out by ikea but depending on your printer tolerances, it might be a tad snug.

It measures 210mm x 210mm, so it basically maxed out the build plate of my ender 3. Took just shy of 15 hours to print at 55mm/s. Printed with Inland PLA+ at 210 and a 65 degree bed.