Raspberry Pi 4B Case for Prusa Enclosure

Simple yet effective case for mounting a Raspberry Pi 4B into the official Prusa Enclosures. Thank you to 'lazax' on Thingiverse for the original case design!

This model supports the use of a 30mm case fan if you so choose.

First, assemble the mount with the case bottom using two 3mm x 8 screws. Next, pop out one of the left side panel rivets by the power supply (see picture). Attach the mount to the enclosure with two 3mm x 12 screws. Start with the top screw and snug it down, but don't overtighten. Before installing the second screw, rotate the Pi case as needed to plug in cords. Finally, screw in the lower screw to complete the installation.