Rode NT-USB articulated arm adapter

This allows you to mount your Rode NT-USB to a cheap articulated arm.
15
158
5
1376
updated February 20, 2022

Description

PDF

This allows you to mount your Rode NT-USB to a cheap articulated arm.

Also this made use of ISO Metric Thread Implementation by Trevor Moseley (20/04/2014) for the threading.

Recommend printing with lots of infill to allow for grip strength of the arm.

Also this is in OpenSCAD so you can adapt the Rode NT-USB for other purpose.

For your information:

NT-USB thread is 20mm diameter with 1mm pitch.

Mounting hole is 5mm in diameter.

Print instructions

Category: Music Summary

This allows you to mount your Rode NT-USB to a cheap articulated arm.

Also this made use of ISO Metric Thread Implementation by Trevor Moseley (20/04/2014) for the threading.

Recommend printing with lots of infill to allow for grip strength of the arm.

Also this is in OpenSCAD so you can adapt the Rode NT-USB for other purpose.

For your information:

NT-USB thread is 20mm diameter with 1mm pitch.

Mounting hole is 5mm in diameter.

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License