br Spool Holder - my take on the Filler

This spool holder is my version of a spool holder that works in HugoHuge's https://www.thingiverse.com/hugohuge/designs Filler Spool Holder ecosystem.

Look in my Spool Holder Collection at https://www.printables.com/@brass_ring/collections/713739 and https://www.thingiverse.com/brass_ring/collections/38795236/things to see my spool holder accessories.

All parts print without supports.

Required additional hardware:

• 2 X 608 bearings
• 1 X Filler brace for mounting the spool holder https://www.thingiverse.com/thing:3020026

The guide has the following additional features:

• the bearings have taller side walls to keep them in place
• there are slots to accept zip ties lock the roller assembly in place
• the X100 mm size will work with Filler Spool Holder compatible rollers
• it is marked for roller size
• print with the bottom on the build plate

The roller:

• has a thinner profile that is working well for me
• it prints in two pieces to eliminate supports
• it is marked for size
• print with the end with the hole on the build plate
• the size is the distance measured between stepped faces

The roller pin:

• print with the unstepped end on the build plate

Category: 3D Printer Accessories