Spinning top

Simple spinning top. Spins for a long time (≈ 1 minute).

Printed in two parts, no glue needed to assemble.

Printing tips:

• both parts printed in PLA, 0.2 mm layer height, 4 walls
• flywheel — no supports, 30% infill
• pin — with supports, may be printed without infill

If you want to make any changes, OnShape document:

https://cad.onshape.com/documents/e00c763ee57d6f698bc0d9d8/w/0138780cc657822e959fbdab/e/f6493aad69089298dc89e6d8?renderMode=0&uiState=64993d55fa098f3f29e0762e