I didn't see what I wanted, so I made it.
It snaps a 3.4 mm USB cable (Short leg) to a 4 mm PTFE tube (long leg).
Designed to stay on the PTFE tube when the USB cable is removed.
I am using this in my dryer library for when a unit is not being actively used.
Printed with SH 95A Overature HS TPU. without any issues. About 1 gram per item in 10 minutes. No supports, no fill, 0.4 nozzle, 0.2 height.
If you find it useful, please post a print.
The author marked this model as their own original creation.