HueForge Blue Raven

A Raven generated on Midjourney - https://midjourney.com 

And “painted" with HueForge Software. No MMU or AMS required. This was printed on an Ender 3.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA Sliceworx Onyx Black Transmission Distance: 0.5
PLA Sliceworx Royal Blue Transmission Distance: 4
PLA Prusament Azure Blue Transmission Distance: 5
PLA SliceWorx Omni White Transmission Distance: 6.5

Swap Instructions:
Onyx Black until layer #5 at 0.48mm
Royal Blue until layer #10 at 0.88mm
Azure Blue until layer #19 at 1.6mm
Omni White for the rest.