Oculus Rift CV1 ( Original ) Golf club Controller Attachment

I recently got a cheap Oculus rift CV1 headset and controller bundle for my PC, and started playing Walk-about Minigolf. Great game but i wanted some more immersion

As far as i could find there are no golf club attachments for the original Oculus and ONLY for the Rift S / Quest ETC. i modelled this from scratch using a dimensional accurate controller model i found online .

uses M3 hardware to secure it together 

i cut off the handle of an old putter , make sure the shaft is close to 12MM where you plan on attaching it. you can use the printed part as a guide to drill the hole that secures the printed part to the shaft ( make sure to do this or it will go flying!! )

i used some 1/16" Closed cell Neoprene foam to secure the controller ( on the inside contoured part of the attachment ) 

any questions, feel free to ask. one of my more involved projects and i am very proud of it, learned a ton along the way . all done with Fusion 360 .

 * DISCLAMER * 

i am NOT responsible for you YEETING your controller into something breakable, this is designed for use as a PUTTER only . please make sure the controller is secure before swinging the damn thing around ( if you have to )