Pipe_Clamp-It (tripod attachment for photographers). 25-35mm diameter variable.

This is a pipe clamp that holds to tubes from 25 to 35mm diameter.

Its bolt has a spacer that will be used or not depending on the tube diameter. See the photos. A thinner diameter requires the spacer.

On the back of the clamp there is a groove in a shape alike a V-mount. A file is provided so you can include it in your own designs and connect your parts to the clamp. For instance, a front-box or a drink holder. You can also create something with magnets for instance.

This is an adaptation of a model that I designed a while ago, but it has new features and now it is all made of plastic including the bolts. Also, I created a lock that avoid the connected part to go up and fall down.

A cork must be glued to the parts to provide friction. See the photos.

It is a strong clamp. Make the bolts with CPE-HT for extra endurance. I also use Cf-Petg and Asa for parts.

Below, a video I made for my frontbox that uses the first clamp that I designed.



Jugular Filmes (@jugular_filmes) | Instagram


FrontBox CameraAccessories - YouTube