Curtain Rod Hanger/bracket

UPDATE 1/1/2025 I finally got a marketplace set up here This is where my premium models and the WHS compatible models will be uploaded to. Stop by and support my work!

I designed this to explore negative space in an object while keeping enough strength for people and pets pulling on the curtains.

It was designed for those curtain rods(which can be seen in the images below) that are ~14mm. I can make the hooks a littler larger but I didn't really design it for larger diameter rods.

Product Dimensions:

Height: 108mm

Width: 13mm

Farthest point of piece from wall: 89mm

Bottom rod distance from wall(wall to center of rod): 32mm

Top rod distance from wall(wall to center of rod): 76mm

I printed the first set, the lighter brown, in a woodfil and the second set in a matte-fiberfil, both pla. Haven't gotten to installing the second set but the first set has been holding up for a week with no issues and the curtain being drawn dozens of times.

.2 layer height should be the minimum to get the side details

supports aren't really necesary

screws holes were made for regular, counter sunk drywall screws

That's it :)