V0.2 Siboor CNC Rear Bed Mount Cable Holder
Siboor CNC Kit for the Rear Bed Mount replaced the cable tie mounts with 3 Bolt holes. Use this to secure cables.
5
16
0
179
updated June 25, 2023
Description
PDFWhile looking for strain relief for the Bed Heater wires, I discovered that the Siboor part had screw holes instead of cable tie holes. This part allows you to secure the wires from the bed heater to the channel for the Rear Bed Mount Right on the kit.
You will need 3 x M3x6 Bolts.
Tags
Model origin
The author marked this model as their own original creation.
