Ford Focus ST center console tray

This is a remix of the Focus RS console tray by majingrim here: https://www.thingiverse.com/thing:3769851 I also used the ST logo text created by JackHydrazine here: https://www.thingiverse.com/thing:3849541 (but scaled down to 80% size)

This should fit 2015-2018 Ford Focus STs. The "ST" text is very slightly lower (~0.5 mm) than the surrounding bottom of the tray, but it is clearly visible. I figured this would be a good depth to avoid trapping too much dirt and also allow for some contrasting paint in the future.

The small ledges/tabs at the top of the part may be a challenging overhang for some printers, so use supports if you you want it to be perfect. I did not use supports and one layer of material was loose/sagging, but is hard to notice unless you look carefully and did not affect the fit in the vehicle.

I was told EU vehicles need to have the notch on the other side so there is also a mirrored version (except for the "ST" text).