Well here I have a simple design for you.
I was looking for a place to put small itmes in my kitchen cabinet. My first print from ASA warped kinda badly so I redesigned it with some reinforcements.
You will need different Screws (diameter) for the different versions:
I printed my Version (M) with a 0,6 mm Nozzle and 0,3 mm layer height, 20% Infill, 2-3 Perimeter.
Dont overtighten the screws.
Have fun and keep printin!
The author marked this model as their own original creation. Imported from Thingiverse.