HSW Hammer holder

Hammer holder for Honeycomb Storage Wall. Fits hammers head up to 23mm wide. It comes with 4 different version - with either inserts or hexagon plugs; and in either standard position or rotated (in case you have mounted your wall in a non-standard 90° rotation).

Remixed from @FrankH's Hammer mount mid sized.

Print instructions

Can be printed in PLA or PETG, without support except of “HSW Hammer holder - insert” that requires support below the insert. 

I printed mine in PETG with 0.6mm nozzle with layer height 0.4mm with a very satisfactory results; however, any other combination of material, nozzle diameter, and layer height should work - this is a very simple model, so there are basically no restrictions.