Footrest for IKEA BLAMES highchair

Update:

I redesigned footrest support, now base can be smoothly adjusted in the range of 5 cm. 

POM: 

screws: 2pcs M4 hex head 35mm, 2pcs m4 flanged button (or round head) 30mm

nuts: 2 pcs m4 hex nut, 2pcs m4 nylock nut

Support elements have to be printed in two instances - one mirrored, 3 walls, 15% infill. Lay flat with supports

Old version: 

Simple footrest for IKEA's child highchair BLAMES. Footrest can be set in 3 different hights. Easy fitting - can be fixed with doubleside adhesive tape or screw.

Printed from PETG, but you can use PLA as well. 

You have to print footrest support in two instances - one have to be mirrored. 

Print it with highest layer, footrest support print flat, 3 walls, 3top/bottom layers, 15% infill, triangles, 

Footrest can be scaled if to long - original model has 25cm, fits well in print height of many 3d printers (compatible with both support versions). Print footrest with 2walls, 3 top/bottom layers, 15% infill