Dual Tape Dispenser

Be a better sharer and make sure you never run out with this basic tape dispenser that is setup to hold two rolls of standard scotch tape or an equivalent.  The main shaft uses a threaded cap to keep the rolls from falling off, and provides an easy way to swap them when needed.  Note that, although the serrated edge seems to work well enough with regular scotch tape, it's likely not sharp enough for other tougher tapes.

This is an easy print that requires no supports (both the main body and cap piece are designed to be printed on their backs).  In addition to the STLs, I'm also attaching the 3MF and gcode files I used to print the one shown in the pictures on my Prusa Mini.