Mop hanger for bathroom heater

Convenient way to store a mop.

Feel free to adjust to your radiator (bathroom heater) as source files are included.

I tried on 3 types and all are a bit different.

You also need 2 M3 screws 30-40mm long.

Put at least 4 perimeters so part will last longer.

I used these settings:

- printer: Prusa MK3S
- layer height: 0.3mm
- nozzle diameter: 0.6mm
- print orientation: as in the STL file
- material: PETG
- supports: not needed
- source files: included
- how many perimeters: 4