Triumph of Death by Pieter Bruegel the Elder
Colorized and modeled using Hueforge by Steve
Printed on a Bambulab P1P using BambuStudio slicer (with custom filament change gcode since slicer wouldn't pause on its own). These are large files so slicing takes forever normally.
Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
Filaments Used (well actually just picked in software but used what I had on hand closest to colors):
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Orange Transmission Distance: 5
PLA+ Sunlu Skin Transmission Distance: 5
PLA+ Sunlu White Transmission Distance: 5
Swap Instructions:
Black until layer #5 at 0.72mm
Orange until layer #7 at 0.96mm
Skin until layer #12 at 1.56mm
White for the rest.
The author marked this model as their own original creation.