Modular Microphone Desk Mount (fits Behringer C-3)

Mic Ring fits the Behringer C-3

If you make your own mic mount / ring: The hole connecting to the post will need to be 15 mm in diameter and 14 mm in its height to work well (Optional: add 1.5mm chamfer to the top of the hole for a better fit).

The boom arm segment is 100mm long (In case you were wondering)

**Settings I Used :D**

*Layer height / width: 0.28mm / 0.6mm (Using 0.6mm nozzle)

*Wall thickness: 1.8 (line count of 3)

*Infill Density: 40%

*Speed: 80mm/s

***IF YOU ARE USING SUPPORTS***: Make sure to modify the overhang angle so supports are not added to the threads. 

*Orientation: Printed the ‘bracket’ both horizontally and vertically which resulted in two successful printed parts. (Make sure when printing horizontally the top post does have some support, or you might have a little overhang clean-up to do).

Additional notes: 

*There are two indentations within the model that are meant for cork or other forms of padding. (One is located at the end of the large screw, and the other is on the underside of the bracket)

A little post processing:

*If your screws, nuts, and bolts are having a tight fit. Use a file and 2 crescent wrenches: the file to remove any blobs and or elephant feet, and the crescent wrenches to slowly screw and unscrew the parts (They will kind of sand each other into a fit that will eventually stay tight by hand and can be undone by hand). 

let me know if there are any other settings you would like to know about… This is the first model I have uploaded :D.

I will be creating some updated parts for this build in the future, if there are any generic parts you would like to see, please let me know :D.