Rotary Fly Tying Vise attachment for Irwin Clamp

If you have a Irwin Quick-Clamp, you can print this rotary fly tying attachment. 

THIS NEEDS ADDITIONAL SUPPLIES:

2 x 689zz bearings (9mmx17mmx5mm)

2 x M4 bolts approximately 3cm long

2 x M4 nuts

1 x M6 carriage bolt at least 60mm (the head of mine is 15mm wide)

1 x Irwin quick-clamp

1 x 4mm wide cotter pin approximately 4cm long

Go to the Instagram for video. 

https://instagram.com/makes_by_jake?igshid=OGQ5ZDc2ODk2ZA==