12mm Mag Paddles with Joystick addon for Sim Gear Shifters

This increases the magnet size from 8mm to 12mm and adds an option for a pinky joystick.
0
6
0
177
updated June 26, 2023

Description

PDF

This is for many of the same style wheel mounted paddle gear shifters. However I did 

specifically make them for my Magnetic shifters found here… 

https://www.printables.com/model/487560-sim-racing-magnetic-paddle-shifters

This mod increases the magnet in the paddle from 8mm to 12mm. This greatly improves the feel and “Snap” of the paddle. I also included a backside mounting plate option that will house an Arduino style “Thumbstick”  I found here…

https://www.amazon.com/dp/B0B5GLYPLT?psc=1&ref=ppx_yo2ov_dt_b_product_details

Opens up a plethora of options from gas and brake to Looking around. 

I split the mounting plate so that the flat side of the joystick enclosure could be placed down for printing. Refer to picture.

I can easily make a special option or configuration if you would like. Always up for a challenge. All work is free of course.

Here is a short video…

Tags



Model origin

The author marked this model as their own original creation.

License