Prusa MMU2 Filament Passage for Platsa - 44mm Bottom Part

This is based on KalleKnall's awesome filament passage for a single IKEA Platsa cabinet.
I am using a stacked Platsa cabinet which means that there is 44mm of wood between the two parts instead of 22mm.

This part replaces Kalle's bottom part and ensures a clean passthroug also for stacked cabinets.

The part might be a bit overkill but I wanted to have a beefy part that can pull the wood planks a bit together to eliminate wiggle.

Print instructions

Printed in .2mm layers. PLA or PETG. My test prints are all in PLA and worked great.
Orientation depends on what you want to have:

• Quick: Print the wider part on the bed with some small supports fo the overhang. Otherwise the loops of the perimeter might fall down.
• Better looking: Flat side on the plate with support for the overhang/brim/wider part.