Buck - HueForge

This is a filament painting of a buck head staring at the camera.

It was made by using Midjourney, using the imagine of “a buck head staring at the camera in a forest, cyanotype style, in a circle”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PolyLite Black Transmission Distance: 0.3
PolyLite Azure Blue Transmission Distance: 3
PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #5 at 0.48mms
Azure Blue until layer #7 at 0.64mms
White until layer #13 at 1.12mms