Jedi Holocron Pen Holder

You are a Jedi Master!
Print this Holocron to learn about the ancient teachings of the Jedi Order and the Force!
It also works as a great pencil holder to organize your desk!
May the force be with you!

Print instructions

DO OR DO NOT. THERE IS NO TRY.

Printing

Print at FINE settings
I printed mine at 0.15 layer height.

Use 20% infill and print at 40 mm/s
I printed mine at 50 mm/s, although I think slower is better for this print.

Print in any filament type.
I printed mine using white PLA.

Painting

For painting, I lightly sanded all of the faces. Then I painted the blue sections first, wiping down any excess paint with a wet cloth. Then I proceeded to paint the golden parts. After drying, I sprayed the print with a clear coat of spray lacquer to prevent the paint from coming off.

You could go ahead and print with either a blue or golden filament and paint the sections with the color you didn't print with.

This Holocron is 50 mm x 50 mm x 50 mm.
You could go ahead and scale it to obtain a bigger Holocron that could be used as a planter or whatever you want it to be.