Bambu Lab heated bed clamp

While warping it could be that the printbed comes off the magnet and that's someting you don' want to happen. (See .gif video)

That's why I made these bed clamps which you can print in PAHT-CF with your bambu lab X1C, you just need to print it in a material that doesn't melt at the heated bed temperature.

Necessary materials:

• DIN933 M4x16
• M4 Short threaded insert

Printsettings:

• 0,6 mm nozzle
• 0,3 mm layer heights
• 4 perimeters
• 4 top -and bottom layers
• 50% Infill
• printed with PAHT-CF

Please note that the STL of Part2 isen't orientated right.