HueForge Snake

I generated a 4 color STL of the snake decal with the amazing HueForge program. I used blue colors but you can use any color combination you want but it is recommend to go from dark colors to light colors. if you interested in how I made this file you should check out HueForge its very affordable and only takes some messing around to get used to the program and make amazing looking prints. 

The print details and layers filament changes are in the describe note file as well as bellow. 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
Polylite Black Transmission Distance: 0.3
Polylite Azure Blue Transmission Distance: 3
Polylite Aqua Blue Transmission Distance: 3
Polylite Cloud White Transmission Distance: 6

Swap Instructions:
Black until layer #6 at 0.56mms
Azure Blue until layer #12 at 1.04mms
Aqua Blue until layer #20 at 1.68mms
Cloud White until layer #23 at 1.92mms
 

The slicer software i used was Bambulab and the printer is the Bambu X1 carbon with AMS

keep and eye out if your interested in more HueForge models I plan to upload many more 

Thanks