Magnetic Gliding Feet for Ikea SAMLA Box 22L

This is a remix for the Ikea SAMLA 22L Box. I found this great model on Thingiverse.com.

I made a cutout for 8mm x 5mm x 3mm neodym magnets. Now you can use this glider feet without using glue or double sided tape. Insert the feet into the correctly slot of the SAMLA-Box and put a second magnet into the box to hold the feet in place. They will never fall off again as long as you didn't remove the second magnet.

Moving the storeage boxes on carpet is so much easier than before. I'am using the glider feet as color application for all my different storeage boxes. 

Printed with PLA+

0.2 Layer hight / 2 Perimeters and 12% Gyroid Infill

After printing I used 2K Epoxy Resin to glue the magnets into the feet.

Thanks alot to the original creator of the model. (Physicator) Thumbs up Buddy !!!