Sleeping Kitty - HueForge

This is a filament painting of a sleeping kitty.  It was made by using Midjourney, using the imagine of “a cartoon, black and white cat sleeping on a white background”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PolyLite Black Transmission Distance: 0.3
PolyLite Grey Transmission Distance: 1
PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #7 at 0.64mms
Grey until layer #28 at 2.32mms
White until layer #40 at 3.28mms