Astronaut Kitty - HueForge

This is a filament painting of an astronaut kitty.  It was made by using Midjourney, using the imagine of “a cat in an astronaut suit, sticker, contour, vector, white background”.  The image was modified a bit to make the background transparent.  It was then put into HueForge and printed out.

Attached is the zip file with the HueForge Project.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PolyLite Black Transmission Distance: 0.3
PolyLite Grey Transmission Distance: 1
PolyLite Orange Transmission Distance: 7.5
PolyLite White Transmission Distance: 5

Swap Instructions:
Black until layer #5 at 0.48mms
Grey until layer #9 at 0.8mms
Orange until layer #15 at 1.28mms
White until layer #29 at 2.4mms