Ring Video Doorbell 3 Plus - Wall Mounts

These mounts are for the Ring Video Doorbell 3 Plus.

When my v1 Ring Doorbell Pro died, I wanted to replace it with the most current version so I ordered the v3 plus. Unfortunately when I opened the box, I found this had 2 mounts (side angled or down tilting) that could have worked with the old mounting holes drilled in my bricks...but I need to mount the doorbell flat on the brick for the camera to work properly for my house.

The V1 Pro to v3 Plus Mounting adapter is simply a 20mm riser to allow using the original screws to mount the adapter and the 4 new screws to mount the new doorbell onto the mount.

The V1 Pro to v3 Plus Mounting Adapter w/ Rain Roof is the same 20mm riser used to allow using the original screws to mount the adapter and the 4 new screws to mount the new doorbell onto the mount, but this one also includes a small roof that overhangs 10mm on the front and both sides.

The Rain Roof is a 2mm thick back-plate that will mount between the v3 plus doorbell and whatever you have it mounted to on your house using the regular mounting holes and will provide the same 10mm overhang in front and on both sides.

Print Settings

Printer Brand:

Anet

Printer: 

A8

Rafts:

No

Supports: 

No

Resolution:

.2mm

Infill: 

10%

Filament: Inland PLA

Category: 3D Printing