Sea Turtle With A Secret Box

A tiny turtle box with a secret box underneath the shell.

Unleash the box by turning the turtle’s shell.

Why did I make this…? - As always, because I can ;)

Print settings

I recommend a layer height of 0.15 mm, but 0.20 mm should work as well.

Print with supports and use an infill of at least 15%. 

Required Parts:

1x 5x5 mm Neodymium Magnet

1x 6x2 mm Neodymium Magnet

1x M3x20 mm hexagon socket screw

1x M3 Nut

Some super glue for the Magnets. (They may not need glue as they should fit in tightly)

Assembly

Before you start, please ensure you have removed all supports from the printed parts.

Step 1: Use a drop of super glue to attach the magnets into the holes provided.

Step 2: Press the M3 Nut into the provided nut hole located at the base of the turtle.

Step 2: Screw the M3x20 mm hexagon socket screw from the top of the shell until the screw reaches the end of the nut. Do not over tighten the screw or the turtle shell will not turn well.

Looking forward to see some makes and what you place into your secret compartment. 

*** Please respect the Creative Commons License. ***

Appreciate a LIKE if you make or download this model.

Enjoy!

Caution:

Loose strong/high-powered magnets may cause severe injury and even death if swallowed. You are responsible for complying with all applicable safety requirements for magnetic items.