NeoPixel Lamp for 256x256 Beds

Rings Lamp:

I wanted to make this but the ring lamp would not fit on my bed size. I did a quick slice and dice to make this fit on 256x256 beds.

Rings Lamp Base:

I combined the project container and stand. I fixed the container so the lid is a much stronger and tighter fit. There is also an alternate base design as well.

For the other STLs, parts, and directions see the original design. Below is the link to adafruits project guide.

https://learn.adafruit.com/neopixel-ring-lamp/overview

Print Settings

Printer:

Bambu Lab X1 Carbon

Rafts:

Doesn't Matter

Supports:

No

Resolution:

0.20mm

Infill:

15%

Filament:

Black

Notes:

On the base I used a height modifier in OrcaSlicer for 0mm-5mm to be 100% infill to add some weight.

I suggest using some CA glue along with the screw to attach the Rings to the lid.