Clamp On Food Protection System!

  Teenagers…….. grumpy, smelly but worst of all permanently hungry. We have an infestation of them(2) in our house. They raid the fridge when your not there to protect your precious munchies, always eating the eclairs, never the sauerkraut……

 This device can literally save your own personal goody stash!!

 Simply clamp onto the fridge shelf that holds your stuff, aim the arrow indicator, tighten the adjustment screw and its like you're standing right there saying ‘NO’.

  The phrase ‘Do Not Consume’ is especially handy as it not only protects food but can also be used to protect wine, beer and other drinks. I have also included a second arrow indicator for aiming at healthy items or if you're feeling nice that says 'Help Yourself!!!', both can be mounted at the same time. 

 This device can also work on flatmates and co-workers….

I printed all the parts without support, there is a slight overhang on the ‘pad’ inside the clamp body(necessary to get over the plastic fronts on fridge shelves) that could be supported but mine printed fine without. The screws and holes are sized for a not too tight fit, so they should all just work straight off the printer. I used a ‘filament change’ script in Cura at layer 17 for the text and edge detail.