Connector Coupling, Exhaust

Manufacturing procedure:

• Material: PETG
• 3D Printer: FDM 3D printer, average print time 4 – 10 hours, depending on size
• Slicer settings: 7 perimeters, 0.3mm layer height, print vertically, use brim
• Post processing instructions: Clean the stringing, remove the brim
• Assembly instructions: Do not use PVC glue, use epoxy or cyanoacrylate, use insulation tape to prevent leaking
   

Customizable parameters:

• InnerDiameter – Enter value of internal diameter – default 120mm
• Height – Total height of the coupling – default 100mm