Tube cutting fixture for MK3 silicone bed mod
Just had to make the hole slghtly bigger for my 8mm tube.
Added a hole in the bottom to easily push out the cut tube.
2
34
0
230
aktualizováno
20. června 2023
Popis
PDFThe original was just a little bit too tight for my 8mm tube. I elnlarged it in Y and Z direction.
After printing it, I decided to add a hole in the bottom, so you can easily push out the tube after cutting it.
Printed with organic supports on the buildplate. PrsueSlicer 2.6-RC2
Štítky
Původ modelu
Autor tento model zremixoval.
