Myš

REPLACEMENT MOUSE COVER FOR MARVO M207

My replacement mouse cover is easy to use and assembled cover for people whos mouse cover
was damaged in any way or they just want different design. It uses 3D printing as a main tool

What do you need?

• 3D Printer
• Around 35g of any filament(tested with pla)
• Insides of Marvo m207
• 2 Screws M3x6mm
• (optional) Polyester Putty
• (optional) Spray Paint
• Price: $30;

Documentation

• Bottom Model
• Top Model
• How to print
• Electronics + Assembly

TODO List

• [ ] Print
• [ ] Insert Electronics
• [ ] Final Assembly

PLACING ELECTRONICS INSIDE

Step 1:

Place the Optics inside

Step 2:

Place the rest
Make sure it is right on the pins so it stays in place

Step 3:

now we can put the bottom on the top

Step 4:

Now we just put two screws it the front and everything is done

Step 5:

Optionaly we can fill the impervections with some sealer
and Spray Paint it at the end.

HOW TO PRINT THE MODEL

Step 1:

Download the model and place it in slicer(idealy cura or prusaslicer)

Step 2:

Top model needs support = Support Overhang Angle around 60degrees
Also in the Top model you can print also upside down for less supports but the print wont be as smooth

Bottom part does not need any supports

Step 3:

Layer hight should be 0.2 for a better looking mouse, but 0.3 also fits
Speed somewhere between 60-100mm/s