NeedleFile Block

A stable, sturdy, and compact block to safely store my needle files, yet still keeping them easily accessible, and comfortable to hold in my hand as necessary.

Slots/holes were designed ⌀6mm x 104mm (incl 3mm bevels) - hole size might vary slightly depending on your printer settings.

Max file length that will sit snugly without hitting the bottom is 100mm (which I specifically designed it for).

SideNote:

I printed it in black because it happened to be loaded in my printer at the time - if you print a different color, please post a make/picture...

Print Settings

Printer:

Snapmaker

Rafts:

Supports:

No

Resolution:

Infill:

10% / 15%

Filament:

Black

Notes:

Depending on the selected print settings, there might be some stringing to clear up near the seam.

How I Designed This

Fusion 360

Should work fine with all standard Snapmaker settings (or related settings on other printers) - I did a FastPrint in order to save time - took roughly 8hrs to print.