Updated Latch for Voron Stealthburner Clockwork 2 (fat_finger)

No explanation needed if you use the SB CW2. The original stealthburner lever design is thin and there's plenty of room for adding material. We call this the fat_finger mod. If you cannot print one because you only have one printer and the latch broke, contact [email protected]!

Print Settings

• Material: ABS
• Layer height: 0.2mm.
• Extrusion width: 0.4mm, forced.
• Infill pecentage: 40%
• Infill type: grid, gyroid, honeycomb, triangle, or cubic.
• Wall count: 4.
• Solid top/bottom layers: 5.
• Supports: NONE.