Flexi Snek

Flexi-snek is your fren :D This is a short and easy print, but you must be able to clear a gap of 0.5mm in order for the parts to not bind up. Snek should flex right after printing with no post-work cleanup.

Print Settings: (I use a Flashforge Adventurer 3 pro)

Print time: 1 hr

• Layer height: 0.25mm
• Print speed: 60mm/s
• Shells: 2
• No brim, raft, or supports
• 0% infill
• Print so the snake is laying flat as shown in photos.