Additional Micro scooter handlebar for children

Second handlebar for a Micro scooter for children when they ride with the scooter, for example, on an extra platform. The dimensions have just been designed for a Micro Scooter I'm using (see photo maybe). The handlebar can be attached with a small screw (2x11). I have also uploaded a model without the hole for the screw, if you want to customize that. You must also remember that with the screw the handlebars can not be (fully) retracted. Maybe I can find another solution in a next iteration.

Used print settings: Infill 15%, no supports, layer height: 0.2mm. I used Prusament PLA Galaxy Black - see pictures.

In the gcode files I set a slower first layer printing speed but a thicker first layer for better adhesion.

Please note/Disclaimer: Of course, I do not take any responsibility in terms of safety, because this depends on many factors such as material, correct attachment, etc. Please make yourself sure that the safety for your child is sufficient!