M3Hinge Cantilever SBox for MK2/3/4
Allows using an M3 screw as a hinge for the Cantileverd SBox
13
79
0
1041
updated
June 17, 2023
Description
PDFThis is a simple update to the hinge area of the box top and bottom which allows an M3 screw to be used as the hinge. The modification is done within the PrusaSlicer project and this may not work properly with other slicers.
The parts uploaded here are limited to the box top and the box bottom. Use the latches, trays, etc from Michal's original upload.
Tags
Model origin
The user re-uploaded this model. The user is not the original author of the model.
SBox for MK2/3/4 - Cantilever box
by Michal FantaIt is not allowed to upload a model that already exists on Printables.
